Tech Help Wireless Router Device Settings

kYuKi

Poster Extraordinaire
=(e)=
Joined
May 2, 2010
Messages
2,354
So I decided to look around my settings and noticed a duplicate name of my PC on the list with a different MAC Address and different IP Address allocation to it and it's also wireless/dhcp. I was wondering if anyone knows what is going on? I'm quite confused. :confused1:
 
Two possible solutions. Please circle one (just one):

1. You have a wireless and a wired connection on your computer. Both are connected to your router.
2. Someone got the password to your router and/or your wireless network and are actively using the connection wirelessly. They have even gone as far as to name their PC the same as yours so that it's not immediately noticible.
 
...Or someone in the "household" has another computer using the same Computer Name? Are you looking at the list of devices that have been connected to it in the past or currently connected?

If in the past you have connected your computer to the router once wired and once via wifi. You will see two different MAC addresses on the list of devices that have been connected to it. If you are currently connected to the router only on wifi or calbe (not both) and both are showing to be actively connected and no one else in the household is connected to it using the same "Computer Name" follow the steps below.

If in case you think someone unauthorized is using your Internet/router or you just want to secure it a bit more;

1. Change the password to your router. (Long random password)
2. Change the password to your wireless network and use WPA2 (Long random password)
3. (If your router supports it) White list the MAC addresses of the devices that are allowed to access your router. This will block any "new devices" trying to gain access to your router.


Hope it helps, good luck!
 
Last edited:
Resetting the router and clearing the device names fixed the issue, thanks for your input guys.
 
Resetting the router and clearing the device names fixed the issue, thanks for your input guys.

No problem! I'm willing to bet it was a simple as some MAC address being retained in the RAM of your router. it probably would have cleared out anywhere from 24 to 72 hours depending on when it stopped receiving framing.
 

Latest posts

Back
Top