Here's a bit of help for you all...
-- Check With League Settings Before Using them in Match Play
-- Use following commands to get optimal FPS, add them in your autoexec.cfg
net_graph "3"
net_graphpos "2"
gl_cull "1"
gl_keeptjunctions "0"
gl_texsort "0"
gl_palette_tex "1"
r_norefresh "0"
gl_round_down "3"
gl_picmip "2"
gl_playermip "2"
gl_ztrick "1"
viewsize "120"
brightness "2"
gamma "3"
fastsprites "2"
fps_max "101"
max_shells "0"
cl_corpsestay "0"
max_smokepuffs "0"
mp_decals "0"
d_spriteskip "0"
cl_himodels "0"
model "gordon"
topcolor "30"
bottomcolor "6"
cl_minmodels "1"
cl_weather "0"
gl_affinemodels "1"
gl_alphamin "0.25"
gl_clear "0"
gl_dither "1"
gl_flipmatrix "0"
gl_flashblend "0"
gl_lightholes "0"
developer "1"
r_dynamic "0"
r_novis "0"
r_traceglow "1"
r_wateralpha "1"
r_mirroralpha "0"
r_bmodelhighfrac "5.0"
r_lightmap "0"
gl_max_size "128" (16/32/64/128/256) (less size less quality and more performance)
precache "1"
gl_texturemode "GL_LIENAR_MIPMAP_LINEAR" //Highest Setting
//GL_LINEAR_MIPMAP_LINEAR (Trilinear, high quality) **Recomend High End Videocard
//GL_LINEAR_MIPMAP_NEAREST (Trilinear, low quality)
//GL_NEAREST_MIPMAP_LINEAR (Bilinear, higher quality)**Recomend Most cards
//GL_NEAREST_MIPMAP_NEAREST (Bilinear, high quality)
use Command dependingon your video card
Advanced Graphic Commands:
1 - enable
0 - disable
-- Control the ATI Trufrom, disable to get a big fps improvement, enable for more quality
ati_npatch "0"
ati_subdiv "0"
-- Control the blood, disable it to get more performance. But who doesnt like blood?
violence_ablood "1"
violence_hblood "1"
-- Enable MMX
r_mmx "1"
-- Disable EAX (gets more FPS)
s_eax "0"
-- Disabling it will make the game render everything, even objects you dont see, only crazy people will disable it.
gl_cull
-- Enabling this will make sure you wont see any crashes and/or 3d bugs, disable it for more FPS
gl_keeptjunctions
-- Multi texturing, disable it only on old 3d cards
gl_texsort
-- MMX, enable to improve performance
r_mmx
-- Joystick, disable for more ram and to improve performance
joystick
-- Disable dither only if you have a really good computer, enable for more performance improvement
gl_dither
-- Enable for more model quality, disable for more performance-
gl_smoothmodels
-- Vsync, enable to limit the fps into your refresh rate, disable for highest fps
vid_wait
-- Lightholes, disable for a little performance gain-
gl_lightholes
-- Enable to see some objects like 1337 sunglasses and stuff like that, disable for more performance
r_mirroralpha
-- Precaching, disable if you have 64mb or less, enable if you have 64mb or more, improves performance
precache
-- Enable or disable the rain in aztec
cl_weather
-- Loading only 2 models, SAS and 1337, enable for big performance gain, disable to see all the models
cl_minmodels
-- Round down, set value from 0-4 , the lower the number the higher the quality, higher number equals more performance
gl_round_down
-- Map quality, set value from 0-2, lower number equals more quality, higher number equals more performance
gl_picmip
-- Player model quality, set value from 0-2, lower number equals more quality, higher number equals more performance
gl_playermip
-- Texture size, values are: 16,32,64,128,256,512,1024 (default is 128), lower value means less quality and more performance
gl_max_size
Right or Left Hand:
cl_righthand (1 is right hand, 0 is left hand)
Disable AutoWeaponSwitch: Automatic Picking up weapons from ground
_cl_autowepswitch "0"
Want the old crosshair?
cl_dynamiccrosshair "0"
Get Old GUI menus:
setinfo _vgui_menus "0"
Step 5 : Tweaking CS Command Line
--Adding these to your CS link or in Steam (my games > right click on CS > Properties)
-Copy paste these in to the Command Line "-console -nojoy -noipx -noforceparms -noforcemaccel -noforcemspd -heapsize 300000 -full -gl -refresh 100"
-console (add console)
PS: use at your own risk... It may help improve your game, or make it worse.
-- Check With League Settings Before Using them in Match Play
-- Use following commands to get optimal FPS, add them in your autoexec.cfg
net_graph "3"
net_graphpos "2"
gl_cull "1"
gl_keeptjunctions "0"
gl_texsort "0"
gl_palette_tex "1"
r_norefresh "0"
gl_round_down "3"
gl_picmip "2"
gl_playermip "2"
gl_ztrick "1"
viewsize "120"
brightness "2"
gamma "3"
fastsprites "2"
fps_max "101"
max_shells "0"
cl_corpsestay "0"
max_smokepuffs "0"
mp_decals "0"
d_spriteskip "0"
cl_himodels "0"
model "gordon"
topcolor "30"
bottomcolor "6"
cl_minmodels "1"
cl_weather "0"
gl_affinemodels "1"
gl_alphamin "0.25"
gl_clear "0"
gl_dither "1"
gl_flipmatrix "0"
gl_flashblend "0"
gl_lightholes "0"
developer "1"
r_dynamic "0"
r_novis "0"
r_traceglow "1"
r_wateralpha "1"
r_mirroralpha "0"
r_bmodelhighfrac "5.0"
r_lightmap "0"
gl_max_size "128" (16/32/64/128/256) (less size less quality and more performance)
precache "1"
gl_texturemode "GL_LIENAR_MIPMAP_LINEAR" //Highest Setting
//GL_LINEAR_MIPMAP_LINEAR (Trilinear, high quality) **Recomend High End Videocard
//GL_LINEAR_MIPMAP_NEAREST (Trilinear, low quality)
//GL_NEAREST_MIPMAP_LINEAR (Bilinear, higher quality)**Recomend Most cards
//GL_NEAREST_MIPMAP_NEAREST (Bilinear, high quality)
use Command dependingon your video card
Advanced Graphic Commands:
1 - enable
0 - disable
-- Control the ATI Trufrom, disable to get a big fps improvement, enable for more quality
ati_npatch "0"
ati_subdiv "0"
-- Control the blood, disable it to get more performance. But who doesnt like blood?
violence_ablood "1"
violence_hblood "1"
-- Enable MMX
r_mmx "1"
-- Disable EAX (gets more FPS)
s_eax "0"
-- Disabling it will make the game render everything, even objects you dont see, only crazy people will disable it.
gl_cull
-- Enabling this will make sure you wont see any crashes and/or 3d bugs, disable it for more FPS
gl_keeptjunctions
-- Multi texturing, disable it only on old 3d cards
gl_texsort
-- MMX, enable to improve performance
r_mmx
-- Joystick, disable for more ram and to improve performance
joystick
-- Disable dither only if you have a really good computer, enable for more performance improvement
gl_dither
-- Enable for more model quality, disable for more performance-
gl_smoothmodels
-- Vsync, enable to limit the fps into your refresh rate, disable for highest fps
vid_wait
-- Lightholes, disable for a little performance gain-
gl_lightholes
-- Enable to see some objects like 1337 sunglasses and stuff like that, disable for more performance
r_mirroralpha
-- Precaching, disable if you have 64mb or less, enable if you have 64mb or more, improves performance
precache
-- Enable or disable the rain in aztec
cl_weather
-- Loading only 2 models, SAS and 1337, enable for big performance gain, disable to see all the models
cl_minmodels
-- Round down, set value from 0-4 , the lower the number the higher the quality, higher number equals more performance
gl_round_down
-- Map quality, set value from 0-2, lower number equals more quality, higher number equals more performance
gl_picmip
-- Player model quality, set value from 0-2, lower number equals more quality, higher number equals more performance
gl_playermip
-- Texture size, values are: 16,32,64,128,256,512,1024 (default is 128), lower value means less quality and more performance
gl_max_size
Right or Left Hand:
cl_righthand (1 is right hand, 0 is left hand)
Disable AutoWeaponSwitch: Automatic Picking up weapons from ground
_cl_autowepswitch "0"
Want the old crosshair?
cl_dynamiccrosshair "0"
Get Old GUI menus:
setinfo _vgui_menus "0"
Step 5 : Tweaking CS Command Line
--Adding these to your CS link or in Steam (my games > right click on CS > Properties)
-Copy paste these in to the Command Line "-console -nojoy -noipx -noforceparms -noforcemaccel -noforcemspd -heapsize 300000 -full -gl -refresh 100"
-console (add console)
PS: use at your own risk... It may help improve your game, or make it worse.
Last edited:

















