HELP: Computer savvy people only

[Coach Hines]

alright, thanks much for the replys everyone! really appreciate it!!

 

[-Jv-]

alright, thanks much for the replys everyone! really appreciate it!!

if you need any help concerning the core i7, I have one myself. ask all you want

 

[Coach Hines]

I'm ordering these, would they work together?

http://www.newegg.com/Product/Product.aspx?Item=N82E16813121361 Mobo
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115202 cpu
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130480 graphics card

 

[genpatton7]

I'm ordering these, would they work together?

http://www.newegg.com/Product/Product.aspx?Item=N82E16813121361 Mobo
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115202 cpu
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130480 graphics card

Yes, they will all work together, but I recommend an Asus board over that Intel one, perhaps it's just my fanboyism though.

 

[RustyPwns!]

I'm ordering these, would they work together?

http://www.newegg.com/Product/Product.aspx?Item=N82E16813121361 Mobo
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115202 cpu
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130480 graphics card

Wowzers, you're going to have a great rig! Good luck with that

 

[EyelessHunter]

Yeah make sure you practice anti static protocol with those nice parts!

 

[Darklethal12]

The GTX series is a great solution, as it supports many new standards the old 9000 series did not support. SLI cannot fix the lack of support for new standards.

 

[Lenny Brezhnev]

Oh yeah, I forgot the RAM then X58 chipset uses tripple channel ram (fancy for using 3 sticks of ram in a bunch then 2)

A few notes on Core i7 RAM:


The new Core i7 has the memory controller on the processor and limits RAM voltage to 1.65v, so old DDR2 typically running @ 2.1v will fry your processor if you try to run it in the new system at spec.
Look for the lowest CAS latency 1333Mhz-DDR3 you can afford, anything running over that speed will need to be over-clocked in the BIOS to run at speed, it won't plug and play. (It can be done, but it's a little tricky)
Even the 1333Mhz may initially post @ 1066Mhz depending on the JEDEC tables of your RAM.