IF you want everybody's voice to sound the same volume in Ventrilo, follow these steps. Sometimes a person will be significantly louder or softer than others, for example.
Go to Setup
Enable Direct Sound by checking the box for output and input device
Select the SFX Button above
Select Compressor and click Add.
Under Compressor Properties, use the following settings:
Gain = Adjust for how loud you want people to be. 14-16 probably good
Attack = 0.01
Release = Around 500
Threshold = Around -30
Ratio = 100
Pre delay = 4.0
After that is done,
Set Codec to GSM 6.10 and to
Format 44Khz, 16 Bit
If you find this doesn't work for you, or you have too many bugs, go back to the compressor and remove.
----------
Gen-ig
Go to Setup
Enable Direct Sound by checking the box for output and input device
Select the SFX Button above
Select Compressor and click Add.
Under Compressor Properties, use the following settings:
Gain = Adjust for how loud you want people to be. 14-16 probably good
Attack = 0.01
Release = Around 500
Threshold = Around -30
Ratio = 100
Pre delay = 4.0
After that is done,
Set Codec to GSM 6.10 and to
Format 44Khz, 16 Bit
If you find this doesn't work for you, or you have too many bugs, go back to the compressor and remove.
----------
Gen-ig
