- Joined
- Oct 15, 2008
- Messages
- 210
well im using a newly unboxed b-52 ls 100 amp head and b-52 ls 412 amp cab, and something has been on my mind about the cab. for the mono part of the amp i can either have it plugged into a 4 ohm (horshoe looking thing i asume is ohm if in not mistaken, correct me if im wrong) and the other jack is a 16 ohm jack (and on full stack, or stereo which has its own switch on the cab, gives it 8 and 8 because there is two jacks. but thats not important)
dose it mater which jack im plugged into? the 4 ohm or the 16 ohm ?
do note this is my first half stack amp, so this is new territory to me.
dose it mater which jack im plugged into? the 4 ohm or the 16 ohm ?
do note this is my first half stack amp, so this is new territory to me.







). my tone is a bit grainy with my uber metal with pulverise setting and gate on 2, and it sounds like my subs (subwoofers, i refer them as subs) are pushin' it a bit, once i crank it up with my 2/3 to the 1rst notch on the main channel and my clean channel with mid cut on at 1 1/2.




