Where does this cord go?

imported_Bacon

I made one post
Joined
Mar 26, 2008
Messages
26
Recently I moved all the components from my current computer to a new case and after installing the motherboard, hard drive, disk drive, power supply, and everything else that needs installing, I stumbled upon this cord that apparently I need for my speakers to work, so where does it go on my motherboard?

Picture1127-1.jpg

The cord

Picture1143.jpg

My motherboard



Thanks in advance
 
That is the cord for your cases' speaker. The speaker that makes the beeps during bootup. It should be connected on the same block as all the little plugs for your power switch, reset switch, etc. Consult your motherboard's manual if you don't know.

Honestly, it's not vital. But there are some instances where the motherboard speaker has come in handy.
 
It looks like there's a place on the lower-right corner of your motherboard where it might go. I say might, because you need to look at your motherboard manual or find the specs on your OEM manufacturer's website and make sure. Nothing worse than plugging something in and having it go boom or sizzle.
 
I didn't suggest that, because those could really easily be plugs for USB hubs or several other things that I can think of.


You know what I need? "Geek Troll" as a title.

*nods*

Edit: On a side note, I must compliment you on your photography skills. That might be the prettiest picture of a speaker cable I've EVER seen.
 
Yeah, look at those details...

Anyways, if it's only for my internal speaker than what could be stopping my other speakers from working?
 
If your soundcard is seated properly and the speakers plugged in properly, I'd guess windows has an issue off the top of my head.

Did you install the drivers? Windows doesn't automatically recognize a lot of sound cards.
 
Well, I did a DxDiag on my computer and for the sound section it says there is an error getting extra sound info so I can't see what model my speakers are, and I don't know where to get drivers for it, any suggestions?
 
Well your speakers themselves are irrelevant to the equation as long as they actually work, it's rare that speakers just up and die without some kind of horrible noise (although, if these are speakers you haven't used in a very long time, it's always possible). Open up your device manager (Right click on 'My Computer' > 'Properties' > 'Hardware' tab > 'Device Manager') and see if there are any devices with a yellow exclamation point. It will automatically expand any category with an error in it. If there is an error, I hope it at least recognizes the device that isn't working properly, if it doesn't and gives you a generic 'PCI Device' or the like, then you're going to have to yank the card and look for the serial number. Alternately, if you don't have a sound card and instead have onboard sound, the model number of your motherboard should be enough to figure out what sound card.

Now, if you have no devices with errors expand the 'Sound, video and game controllers' category and see what it has down- you will probably have all or some of the following: 'Audio Codecs', 'Legacy Audio Drivers', 'Legacy Video Capture Drivers', 'Media Control Devices', 'Video Codecs'. Anything not on that list should be your actual sound card, for example the motherboard I put in this machine at work has 'Realtek High Definition Audio'.
 
I've got Realtek High Definition Audio too, anyways, I clicked on it and went to the drivers tab and searched if there were any updates or stuff and it says I have the most recent drivers installed and there's nothing wrong with it. Let me restart and see if I get anything.
 
Ok, then you're using onboard audio. Windows doesn't always know what is best, what is your motherboard make and model? We'll see about getting you some new drivers.
 
Ugg. I had hoped you knew that.

Ok, in that first picture, you see right where the flash reflects in the middle of the board? Can you get me another picture of that area, up close and without the flash glare? One of the numbers/stickers there should lead us to the make and model with some searching.
 
FWIW, a lot of onboard sound cards output the 'system beeps' though your desktop speakers, so it might not be exactly necessary.

Searching on that model pops up the following link...
http://support.packardbell.com/uk/item/index.php?i=instr_connectors_MCP61PM-AM&ppn=PB82113801
Speaker Cable is number 11.

You can get the Realtek driver from anywhere, as it's a pretty generic chipset used by dozens of manufacturers... Just be sure not to download one of of one of those 'free driver sites'.
Realtek Downloads: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PFid=24&Level=4&Conn=3&DownTypeID=3
Looks like they released a new driver on Sunday, so it might be worth a look...
 
[quote1207156373=Flippy Squirrel]
Is your computer an Acer, or did the mobo come from an Acer?
[/quote1207156373]

Yeah it's an Acer.

Anyways thanks for the help Lafinass and nocturne, you guys are awesome!

I'll report back when the download finishes
 
No problem.

You should really try to locate the CD that goes with your motherboard. Your system may suffer using generic chipset drivers and since the model number doesn't match identically to the one listed on their page (Yours says MCP61SM-AM theirs says MCP61SM2AM) I hesitate to suggest you use the chipset drivers they have listed.
 

Latest posts

Back
Top