Need help right now

D

D-Tektive

Forum Fiend
Joined
Jun 20, 2008
Messages
602
After using an OS installation CD, everything worked perfectly fine througout the whole installation sequence.

But when it was done, i came bak after leaving it alone and noticed the screen was in blk/white prompt

so i restarted my computer and nothing popped open, not even my Acer logo screen that says f12 at the bottom.

please guys, hurry and help me if you can, cuz this is a very dramatic time of my life
 
Well its a huge stretch but your videocard could be shot, but that wouldn't really explain the blinking white cursor.

Other than a problem w/ the video card or display, I can only think that your motherboard (/BIOS) is shoddy...

Really it could be any number of problems but the blinking white cursor perplexes me.
Perhaps try a different video card if you have one (or test your videocard in a different computer)
Otherwise it could just be your motherboard, put your HDD in another computer and see if it'll boot off of that.


The blinking white cursor and the fact that no logo screen comes up tends to make me think your BIOS went kaput, you can read your manual and try to reset the CMOS memory (its either a button or a jumper you have to short)
 
Does your computer beep when you turn it on? If so, count the number of beeps and look through your manual for the answer.
 
NCAuthority said:
Does your computer beep when you turn it on? If so, count the number of beeps and look through your manual for the answer.
Click to expand...

beeps as in beeping sounds or blinking lights?

The icon that lookslikea can flashes for 20 times and stops...

Inside seems fine, since the fan works alright
 
He's speaking of the POST (Power On Self Test) process. Most computers will make a short beep once if the POST is completed successfully. This would happen a few moments after you power your computer up. It's usually followed by the logo, or text about the computer depending on the setting.

Have you ever heard this beep? If you have, then are you hearing it now?

//edit: The Cylinder with the LED next to it normally represents hard drive activity.
 
Last edited:
jaxory said:
He's speaking of the POST (Power On Self Test) process. Most computers will make a short beep once if the POST is completed successfully. This would happen a few moments after you power your computer up. It's usually followed by the logo, or text about the computer depending on the setting.

Have you ever heard this beep? If you have, then are you hearing it now?

//edit: The Cylinder with the LED next to it normally represents hard drive activity.
Click to expand...

nothing really, just the humming of the computer....
 
hmm so this is where you dissappeared 2 , do this , open the pc , see the battery in there , take it out , unplug the pc wait 10 min , plug it back in turn it on , all fixed yea , prolly , if not get in touch man . if it does work (prolly will) then shut back down and put battery back in .
 
_Xx_HeX_xX_ said:
hmm so this is where you dissappeared 2 , do this , open the pc , see the battery in there , take it out , unplug the pc wait 10 min , plug it back in turn it on , all fixed yea , prolly , if not get in touch man . if it does work (prolly will) then shut back down and put battery back in .
Click to expand...

battery is the flat watch kind, not the cylinder AA kind
 
_Xx_HeX_xX_ said:
hmm so this is where you dissappeared 2 , do this , open the pc , see the battery in there , take it out , unplug the pc wait 10 min , plug it back in turn it on , all fixed yea , prolly , if not get in touch man . if it does work (prolly will) then shut back down and put battery back in .
Click to expand...

didnt work...also, there are nobeeps...just the usual clackingof the hardrive beingaccessed...
 
L0ck-0n said:
didnt work...also, there are nobeeps...just the usual clackingof the hardrive beingaccessed...
Click to expand...

Were there ever any beeps at start up that you can remember? If not then, you probably still wouldn't hear beeps. It may be that you don't have an internal speaker connected.
 
jaxory said:
Were there ever any beeps at start up that you can remember? If not then, you probably still wouldn't hear beeps. It may be that you don't have an internal speaker connected.
Click to expand...

no beeps, but i am planning to go to Frys tomorrow morning to get a new motherboard....reason cuz the keyboard doesnt work and the Beep when POST is successful isnt coming out.

Hope this works, and i hope others will 2
 
dude it can be 3 things , bad board , bad ram or bad cpu , and because i know u ble screened before id diagnose it ram .
 
_Xx_HeX_xX_ said:
dude it can be 3 things , bad board , bad ram or bad cpu , and because i know u ble screened before id diagnose it ram .
Click to expand...

well i found out that my uncle works for a computer part manufacturaing company...i may be able to buy a new power box, card, and a board for a pretty cheap price (i have a feeling my uncle will cover some of the cost)

ill keep in touch and btw, Hex, ur kid answered the phone wheni called u, dangerous to let strangers talk 2 ur kids over the phone >.> lots of scary bankers out there
 
You must log in or register to reply here.
Back
Top