- Joined
- Aug 14, 2008
- Messages
- 88
Ok, so first of all, I'm on a laptop, so I don't expect great framerates or anything.
HOWEVER, I used to get a lot better of a framerate, but now I sometimes get as low as 5-10 fps. Ridiculous.
Whenever I start playing TF2, especially right after a reboot, I can get a really good framerate. If I turn all my settings down, I can get 150 fps. Awesome. With good settings on, I get 40-70, and 20-30 in fights.
So, for some reason, I'll be playing along, and then 5 minutes or so into my first game, I'll just start creeping along. It will sometimes reset after I die, so I'll be back to getting 30 fps or so, but it never gets back up to the original 40-70 really.
So, I've tried it with pretty much every setting imaginable. It doesn't seem to be affected by the video card settings, as I get about the same starting framerates whether I'm at 1440 or 1900 resolution.
My CPU seems to jump to 100% from 60-70%, which is what I assume the problem is, but I don't know if there's any way around this, or how to find out what's causing it.
Again, this didn't used to happen, so I was wondering if anyone else has experienced this or has ideas on what to do? I just can't find a decent way of debugging it.
Specs:
Intel Core 2 Duo T7600 @2.33GHz
4GB RAM
Vista 32 bit (don't be too quick to blame Vista; it's done just fine before)
Low settings on 1440x800
HOWEVER, I used to get a lot better of a framerate, but now I sometimes get as low as 5-10 fps. Ridiculous.
Whenever I start playing TF2, especially right after a reboot, I can get a really good framerate. If I turn all my settings down, I can get 150 fps. Awesome. With good settings on, I get 40-70, and 20-30 in fights.
So, for some reason, I'll be playing along, and then 5 minutes or so into my first game, I'll just start creeping along. It will sometimes reset after I die, so I'll be back to getting 30 fps or so, but it never gets back up to the original 40-70 really.
So, I've tried it with pretty much every setting imaginable. It doesn't seem to be affected by the video card settings, as I get about the same starting framerates whether I'm at 1440 or 1900 resolution.
My CPU seems to jump to 100% from 60-70%, which is what I assume the problem is, but I don't know if there's any way around this, or how to find out what's causing it.
Again, this didn't used to happen, so I was wondering if anyone else has experienced this or has ideas on what to do? I just can't find a decent way of debugging it.
Specs:
Intel Core 2 Duo T7600 @2.33GHz
4GB RAM
Vista 32 bit (don't be too quick to blame Vista; it's done just fine before)
Low settings on 1440x800














He bought an aftermarket usb powered cooler that sat under his laptop. It helped out considerably. 




