Need some help raizing my fps.

AudieMurphy

Rookie
Joined
Apr 30, 2009
Messages
77
I play dods and I am not tech savy. Im looking to up my fps I know doing the net_graph3 thing. from one secontion I read but it was for cs-s. when i did it I got the fps and it went up and down mostly between 14 and 20. So im looking to get aloght better than that. so what do I need to do
 
Last edited:
what game u trying to raise? and what kind card are u using?

DOD-s I can;t do much with my card because its intergrated but here is my specs on my laptop


Hard Drive
Capacity : 250GB2
Speed : 5400rpm
Type : Serial ATA

Memory
Installed : 4GB PC2-6400 (2GBx2)
Maximum : 4GB
Speed : 800MHz
Type : DDR2

Graphics
Chipset : Intel? GM45 Express Chipset
Interface : VGA out with Smart Display Sensor
Processor : Mobile Intel? Graphics Media Accelerator 4500MHD with Intel? Clear Video Technology with Total Available Graphics Memory of 1750MB (max.)10

Processor
Front Side Bus Speed : 800MHz
L2 Cache : 2MB
Speed : 2.0GHz1
Technology : Intel? Centrino? processor technology
Type : Intel? Core? 2 Duo Processor T5800
 
Your spec's look okay.

I don't see why your getting low FPS.

Try lowering your settings in video?
Turn off V-Sync or any high PC video functions?
 
u can try go into ur bios and set the Integrated Graphics MB of memory higher .. what kind of laptop is it? if it is sony their is no way to do it
 
Power on the computer and by pressing <Del> immediately allows you to enter Setup.
look under Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
one of those should help u if not look under PnP/PCI Configurations set the Integrated Graphics as the main
 
i was :scared: i knew u was going say that .. i dont think anyone can help u cause sony got their pc/laptop on lock down .. unless u change to new bios ..that why i never will buy pc/laptop/notebook from sony, but dont get me wrong i got a sony tv and works great..and i never will buy Intel? Centrino .. intel pentium is way to go ;) if u cant afford the new intel i's
 
Just try to lower your graphics settings.

Also if your fps are that low try using "cl_showfps 1" instead of"net_graph" as it won't create more drain on your graphics to display.
 
Your spec's look okay.

I don't see why your getting low FPS.

Try lowering your settings in video?
Turn off V-Sync or any high PC video functions?
No..they aren't ok. That's one of the worst integrated gpu's you can get. Using a FPS config is the only way he's going to raise his fps. But even with those CSS won't have great fps.
 
No..they aren't ok. That's one of the worst integrated gpu's you can get. Using a FPS config is the only way he's going to raise his fps. But even with those CSS won't have great fps.

I don;t play ccs that much but I do play dod alot. What fps config would you recomend to getting the fps up? how do I kow the avarage fps? I noticed a thing that says fps and the numbers go up and down but across from that I noticed a thing that said 20// or something is that the avrage becaue i got that up into the 30. Im not tech savy about this stuff but im trying to learn even if its going slow.,
 
go to options then advanced turn everything to low then go into game sever type this
cl_ejectbrass "0"
cl_forcepreload "1"
cl_identiconmode "2"
cl_muzzleflash_dlight_1st "0"
cl_muzzleflash_dlight_3rd "1"
cl_phys_props_enable "0"
cl_phys_props_max "0"
cl_ragdoll_collide "0"
cl_ragdoll_fade_time "0"
cl_ragdoll_physics_enable "1"
cl_show_splashes "0"
cl_wpn_sway_scale "0"
cl_enabledeatheffects "0"
cl_enabledeathfilmgrain "0"
g_ragdoll_fadespeed "5"
gl_clear "0"

//Light and Shadow
mat_filterlightmaps "0"
mat_hdr_level "0"
mat_disable_bloom "1"
mat_bloomscale "0"
muzzleflash_light "0"
r_maxdlights "0"
r_maxnewsamples "0"
r_minnewsamples "0"
r_maxsampledist "0"
r_lightaverage "0"
r_worldlightmin "1"
r_PhysPropStaticLighting "0"

//Water Settings
r_forcewaterleaf "0"
r_waterforceexpensive "0"
r_waterdrawreflection "0"
r_waterdrawrefraction "0"
r_waterforcereflectentities "0"
mat_wateroverlaysize "16"
mat_clipz "0"
r_cheapwaterend "0.1"
r_cheapwaterstart "0"
cl_show_splashes "0"

//CPU
dsp_slow_cpu "1"

//Sound
snd_mixahead "0.1"
snd_pitchquality "1"
 
Last edited:
Thanks I will try that out as soon as i get back. I have been working on it for a bit and got the fps up a little so hopfully that will help out alot
 
go to options then advanced turn everything to low then go into game sever type this
cl_ejectbrass "0"
cl_forcepreload "1"
cl_identiconmode "2"
cl_muzzleflash_dlight_1st "0"
cl_muzzleflash_dlight_3rd "1"
cl_phys_props_enable "0"
cl_phys_props_max "0"
cl_ragdoll_collide "0"
cl_ragdoll_fade_time "0"
cl_ragdoll_physics_enable "1"
cl_show_splashes "0"
cl_wpn_sway_scale "0"
cl_enabledeatheffects "0"
cl_enabledeathfilmgrain "0"
g_ragdoll_fadespeed "5"
gl_clear "0"

//Light and Shadow
mat_filterlightmaps "0"
mat_hdr_level "0"
mat_disable_bloom "1"
mat_bloomscale "0"
muzzleflash_light "0"
r_maxdlights "0"
r_maxnewsamples "0"
r_minnewsamples "0"
r_maxsampledist "0"
r_lightaverage "0"
r_worldlightmin "1"
r_PhysPropStaticLighting "0"

//Water Settings
r_forcewaterleaf "0"
r_waterforceexpensive "0"
r_waterdrawreflection "0"
r_waterdrawrefraction "0"
r_waterforcereflectentities "0"
mat_wateroverlaysize "16"
mat_clipz "0"
r_cheapwaterend "0.1"
r_cheapwaterstart "0"
cl_show_splashes "0"

//CPU
dsp_slow_cpu "1"

//Sound
snd_mixahead "0.1"
snd_pitchquality "1"
Ok .i have put that list in console. But now when I try start my dod games I get automaticly disconected saying invaled streamkey length and it won;t let me connect to any game servers. Is there a way to undo the stuff I did like a reset command or something? If now what should I put in to reset that stuff?
 
did u copy and pasted it like this ??
cl_ejectbrass0

then enter key for each line only one line at a time

cl_forcepreload1
 
No..they aren't ok. That's one of the worst integrated gpu's you can get. Using a FPS config is the only way he's going to raise his fps. But even with those CSS won't have great fps.

lol I was just about to quote and make this reply. The source of your problem lies with your integrated gpu. The only way to get decent fps with that machine is to junk it and buy a new computer. Sorry.

If you try and tweak around with the game and force higher fps, you will be putting too much stress on that board. Its a lose-lose either way.

If you decide for a new computer find me on ventrilo, I can help you out.

-Blue
 
lol I was just about to quote and make this reply. The source of your problem lies with your integrated gpu. The only way to get decent fps with that machine is to junk it and buy a new computer. Sorry.

If you try and tweak around with the game and force higher fps, you will be putting too much stress on that board. Its a lose-lose either way.

If you decide for a new computer find me on ventrilo, I can help you out.

-Blue
It seems to work well. Not going to junk it just becuase on intergrated gpu thats not the best for gaming . Its a good computere for what I need. So far it has run fairly smooth since i uped the fps. Don;t realy have the money for a new computer these days. It may not be the best for the gameing but its doing ok so far .
 
I'm not really into laptop graphics card mainly because I don't use 'em but try forcing your Directx Level by putting a code in console.

Article about posting it here: http://bit.ly/N8e99 (Steam Customer Support)
 
Back
Top