New Hardware New Desktop

The post status checker will flash a few of the lights but then go off. I've unplugged the optical drive so that's a non issue. The fans all run other than the gpu.
 

Attachments

  • 20200924_152004.jpg
    20200924_152004.jpg
    1.4 MB · Views: 288
Last edited:
Did you make sure it's seated all the way? If the fans aren't turning on and it's not displaying anything, it's either DOA or not seated all the way
 
There's two 8 pin connectors for power, however if only one of them was plugged in or if it was incorrectly plugged in it would mostlikely still boot with an error screen. But it's currently not booting at all
 
One of those is for the cpu. Here's the connectors the power supply has:
1 x 20+4-Pin Main connector
1 x EPS / ATX 12V 4+4-Pin connector
6 x SATA
1 x 6+2-Pin PCI-E
1 x 6-Pin PCI-E
4 x Peripheral
1 x FDD
 
This looks like another 8 pin connector
If it's not and you only have that 1 6+2 connector and that's a 6 pin then you're going to need to get a bigger psu. It's not powerful enough for that gpu.
 
Got a EVGA 750 GA supernova. Installing now will see if this fixes everything. It did also have 2 8 pins for cpu so ill add the extra 4 pin for the cpu
 

Latest posts

Back
Top